Blood Bag Sealers

POA

Product Information

Biosealer CR4

Built for sealing PVCtubes, especially for bloodbags, tubes or plasmapheresis sets. It has a powerful RF unit which makes it suitable both for routine procedures at donation rooms and repeated operations at preparation rooms without overheating. CR4 gives a wide and safe seal and you can easily pull the tubes apart.

The power unit can either be connected to a bench unit or an ergonomic sealing handle. The ergonomic sealing handle is easy to move and therefore it is easy to reach the part of the tube to be sealed.

Both units have a 1.9m cable. The electrodes are well protected by a plastic cover and are easy to clean.

 

Description:

 

  • Voltage demands: 100/115/230/240 VAC 50/60 Hz Power consumption: 220 VA
  • Internal fuse: Protection for high current, type PTC Sealing time: Adjustable 0,5 - 5 sec
  • Frequency: 40,68 MHz Output rf power: 70 W
  • Dimensions: 290(L) x 220(W) x 88(H) mm (incl. rf-outlet) Weight: 4,1 kg
  • Operation: Continuously
  • Classification: Protection against electrical shock: class I type B.
  • Safety approval: IEC 601-1 EMC-approval: IEC 601-1-2,
  • Emission EN55011 group 2 class B Bench unit: 180(L) x 75(W) x 75(H)mm Weight: 1 kg
  • Length of cable: 1,9 m
  • Sealing handle: 180(L) x 145(H) Weight: 0.22 kg
  • Length of cable: 80cm spiralled, 230cm extended.The Biosealer CR6 is built for sealing PVCtubes, especially for bloodbags, plasmapheresis sets and tubes. The CR6 has a powerful RF unit which makes it suitable both for routine procedures at donation rooms and repeated operations at preparation rooms without overheating.

 

Biosealer CR6

Gives a wide and safe seal and you can easily pull the tubes apart. The power controlunit has a built in battery so it can be used on a bench or out and about

It comes supplied complete with an ergonomic sealing handle which is easy to move and therefore easy to reach the part of the tube to be sealed.

The handle has a 1.9m coiled cable. The electrodes are well protected by a plastic cover and are easy to clean.

 

Description:

 

  • Voltage demands:  2x 12v internal batteries
  • 240  VAC 50/60 Hz to recharge using mains adapter Power consumption: 120 VA effective
  • Sealing time: Adjustable 0,5 - 5 sec Frequency: 40,68 MHz
  • Output rf power: 70 W
  • Dimensions: 266(L) x 119(W) x 88(H) mm (incl. rf-outlet) Weight: 3,1 kg inc batteries
  • Operation: Continuously
  • Classification: Protection against electrical shock: class Il type B.
  • Safety approval: EN 60601-1 EMC-approval: IEC 601-1-2,
  • Emission EN55011 group 2 class B Bench unit: 266(L) x 75(W) x 75(H)mm Weight: 1 kg
  • Length of cable: 1,9 m
  • Sealing handle: 180(L) x 145(H) Weight: 0.22 kg
  • Length of cable: 80cm spiralled, 230cm extended.

 

 

Product Code: CR

View or download a PDF for this product

Customer Reviews

This product hasn't been reviewed yet. Write a review

 

 

SiteLock

Copyright © QED Scientific Ltd. All Rights Reserved.